openscenegraph 运行自带例子的时候突然提示 "系统找不到指定的路径"

siucan

有没有遇过这样的问题 Cmake配置的openscenegraph 例子之前一直好用，突然编译不通了，而且是所有的例子，编译错误：
1>------ Build started: Project: ZERO_CHECK, Configuration: Debug Win32 ------
1>Checking Build System
1>系统找不到指定的路径。
1>Project : error PRJ0019: A tool returned an error code from "Checking Build System"
1>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\ZERO_CHECK.dir\Debug\BuildLog.htm"
1>ZERO_CHECK - 1 error(s), 0 warning(s)
2>------ Build started: Project: OpenThreads, Configuration: Debug Win32 ------
2>Building Custom Rule E:/OSG/OpenSceneGraph/src/OpenThreads/win32/CMakeLists.txt
2>系统找不到指定的路径。
2>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/src/OpenThreads/win32/CMakeLists.txt"
2>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\src\OpenThreads\win32\OpenThreads.dir\Debug\BuildLog.htm"
2>OpenThreads - 1 error(s), 0 warning(s)
3>------ Build started: Project: osg, Configuration: Debug Win32 ------
3>Building Custom Rule E:/OSG/OpenSceneGraph/src/osg/CMakeLists.txt
3>系统找不到指定的路径。
3>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/src/osg/CMakeLists.txt"
3>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\src\osg\osg.dir\Debug\BuildLog.htm"
3>osg - 1 error(s), 0 warning(s)
4>------ Build started: Project: osgUtil, Configuration: Debug Win32 ------
4>Building Custom Rule E:/OSG/OpenSceneGraph/src/osgUtil/CMakeLists.txt
4>系统找不到指定的路径。
4>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/src/osgUtil/CMakeLists.txt"
4>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\src\osgUtil\osgUtil.dir\Debug\BuildLog.htm"
4>osgUtil - 1 error(s), 0 warning(s)
5>------ Build started: Project: osgDB, Configuration: Debug Win32 ------
5>Building Custom Rule E:/OSG/OpenSceneGraph/src/osgDB/CMakeLists.txt
5>系统找不到指定的路径。
5>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/src/osgDB/CMakeLists.txt"
5>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\src\osgDB\osgDB.dir\Debug\BuildLog.htm"
5>osgDB - 1 error(s), 0 warning(s)
6>------ Build started: Project: osgText, Configuration: Debug Win32 ------
7>------ Build started: Project: osgGA, Configuration: Debug Win32 ------
6>Building Custom Rule E:/OSG/OpenSceneGraph/src/osgText/CMakeLists.txt
7>Building Custom Rule E:/OSG/OpenSceneGraph/src/osgGA/CMakeLists.txt
6>系统找不到指定的路径。
6>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/src/osgText/CMakeLists.txt"
7>系统找不到指定的路径。
6>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\src\osgText\osgText.dir\Debug\BuildLog.htm"
6>osgText - 1 error(s), 0 warning(s)
7>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/src/osgGA/CMakeLists.txt"
7>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\src\osgGA\osgGA.dir\Debug\BuildLog.htm"
7>osgGA - 1 error(s), 0 warning(s)
8>------ Build started: Project: osgViewer, Configuration: Debug Win32 ------
8>Building Custom Rule E:/OSG/OpenSceneGraph/src/osgViewer/CMakeLists.txt
8>系统找不到指定的路径。
8>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/src/osgViewer/CMakeLists.txt"
8>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\src\osgViewer\osgViewer.dir\Debug\BuildLog.htm"
8>osgViewer - 1 error(s), 0 warning(s)
9>------ Build started: Project: Examples osgteapot, Configuration: Debug Win32 ------
9>Building Custom Rule E:/OSG/OpenSceneGraph/examples/osgteapot/CMakeLists.txt
9>系统找不到指定的路径。
9>Project : error PRJ0019: A tool returned an error code from "Building Custom Rule E:/OSG/OpenSceneGraph/examples/osgteapot/CMakeLists.txt"
9>Build log was saved at "file://e:\OSG\OpenSceneGraph\build\examples\osgteapot\example_osgteapot.dir\Debug\BuildLog.htm"
9>Examples osgteapot - 1 error(s), 0 warning(s)
========== Build: 0 succeeded, 9 failed, 0 up-to-date, 0 skipped ==========

昨晚还是好用的，今天再编译的时候就报这样的错，我今天都没用过电脑啊！！！！

starmessage

说实话，编译很痛苦，时间太久了，我用的预编译包，嘿嘿。坐等答案，我有老大。

siucan

starmessage 发表于 2012-9-1 14:22
说实话，编译很痛苦，时间太久了，我用的预编译包，嘿嘿。坐等答案，我有老大。

唉 没办法 我重新编译的  

array

您是否移动了源代码目录或者编译目录的位置？cmake会记录绝对路径，因此请不要轻易改变目录